APLawrence - Information and Resources for Unix and Linux Systems, Bloggers and the self-employed
RSS Feeds Get APLawrence.com by RSS











(OLDER) <- More Stuff -> (NEWER) (NEWEST)
Home > News Posts > panic trap bios checksum
Printer Friendly Version




News Group Posts

panic trap bios checksum




From: Bela Lubkin <belal@sco.com>
Subject: Re: meaning of CheckSum: 0x02 * * Invalid * * in hw output ?
Date: Thu, 19 Dec 2002 22:28:15 GMT
References: <862c810.0212180852.2a1e3b3a@posting.google.com> 

Terry Paterson wrote:

> I have a server in the field which is occassionally panicing, with a
> k_trap (..00E )message.
> 
> we are trying to have the hardware checked out - running diagnostics
> on the RAM, etc ..
> 
> however - whilst looking around I spotted the following in the output
> from the hw command can anyone tell me what it means ? and does anyone
> have any thoughts as to what might be causing the panics ? there
> does'nt seem to be any obvious pattern - sometimes there is nobody
> logged-in, sometimes 1-2 hundred users, it has an Intel PRO100/B NIC
> which I seem to remember has had quite a few driver updates - so I
> might check that one out too.



My car doesn't work, do you have any ideas on why?  Not enough
information.

Panics often (not always) have an informational message before the
k_trap message; you should include that.  More importantly, there is
always a way to get information about _where_ in the kernel the panic
happened.  If a dump is written to disk, you can get kernel stack
tracebacks with any of `sysdump`, `scodb` or `crash`.  If not, you can
link scodb into the kernel and get an interactive traceback during a
panic.

>    Adapter BIOS ROM
>        Address:        0xc8000 - 0xc87ff
>        Size:           2Kb
>        CheckSum:       0x00  (As expected)
> 
>    Adapter BIOS ROM
>        Address:        0xc8800 - 0xcc7ff
>        Size:           16Kb
>        CheckSum:       0x02  * * Invalid * *
> 
>    System BIOS ROM
>        Address:        0xe0000 - 0xfffff
>        Size:           128Kb
>        BIOS Date:      05/17/01
>        BIOS Category:  IBM PC/XT-286
>        BIOS ID:        PhoenixBIOS 4.06.43 RK

OpenServer makes very little use of BIOS.  `hw` presents BIOS
information so that you'll know more about your machine, not because it
is terribly important to OSR5.  For instance, the "BIOS ID" above tells
you whose motherboard BIOS you have, which sometimes helps trace down
bugs (especially boot bugs).

There is a standard for BIOS ROMs which includes a method of
checksumming them to verify their integrity.  Whatever adapter ROM that
is, its checksum is bad -- the ROM is either a defective unit, or the
vendor did not follow the protocol for proper checksumming.  I don't
know how common it is for BIOS ROMs to ignore the checksumming protocol
(I've never noticed one like that before, but I wasn't looking).

If you run `hw -v -r rom`, it will search each ROM for text strings.
This will help you figure out which device's ROM has the bad checksum.














But it's a red herring.  The BIOS checksum is just an aside, like if my
mechanic told me "yeah, it won't start, and I'm working on that; by the
way, did you notice that the left rear running light is out?".  Not the
cause of the problem.

Go get us some good information about the panic.

>Bela<


If this page was useful to you, please click to help others find it:  

Your +1's can help friends, contacts, and others on the web find the best stuff when they search.

Comments?



Click here to add your comments



Don't miss responses! Subscribe to Comments by RSS or by Email

Click here to add your comments


If you want a picture to show with your comment, go get a Gravatar



Auto FTP Manager

Have you tried Searching this site?

Unix/Linux/Mac OS X support by phone, email or on-site: Support Rates

This is a Unix/Linux resource website. It contains technical articles about Unix, Linux and general computing related subjects, opinion, news, help files, how-to's, tutorials and more. We appreciate comments and article submissions.

Publishing your articles here

Jump to Comments



Many of the products and books I review are things I purchased for my own use. Some were given to me specifically for the purpose of reviewing them. I resell or can earn commissions from the sale of some of these items. Links within these pages may be affiliate links that pay me for referring you to them. That's mostly insignificant amounts of money; whenever it is not I have made my relationship plain. I also may own stock in companies mentioned here. If you have any question, please do feel free to contact me.

Specific links that take you to pages that allow you to purchase the item I reviewed are very likely to pay me a commission. Many of the books I review were given to me by the publishers specifically for the purpose of writing a review. These gifts and referral fees do not affect my opinions; I often give bad reviews anyway.

We use Google third-party advertising companies to serve ads when you visit our website. These companies may use information (not including your name, address, email address, or telephone number) about your visits to this and other websites in order to provide advertisements about goods and services of interest to you. If you would like more information about this practice and to know your choices about not having this information used by these companies, click here.

g_face.jpg

This post tagged:

       - Bela
       - SCO_OSR5




Unix/Linux Consultants

Skills Tests

Guest Post Here